Drive Socket for Series 4 OmniBlend

Replacement Drive Socket for OmniBlend Series 4 Blenders

Fits all series-4 Omniblend models*
Designed to be a load-absorbing part, the drive socket needs replacing if there is any play.

To check, remove the jug cushion, grasp the black mushroom head and attempt to wriggle from side-to-side.  The only movement should be round and round!

Replacing the drive socket is part of your regular maintenance – we recommend you check it every 3-6 months for wear by following the instructions here.
Replacement can be undertaken by any competent handy-person (instructions supplied) and takes about 5 minutes.

Tools required: long flat-ended screwdriver, small Phillips screwdriver and a pair of thin-nosed pliers.

*To check your model number, look at the Serial number located on the base of the machine. Series 4 Omniblenders all start with a “4” or earlier.