Replacement Drive Socket for OmniBlender – 5 Series
Replacement drive socket that fits all series-5 models*.
Designed to be a load-absorbing part, the drive socket needs replacing if there is any play. To check, remove the jug cushion, grasp the black mushroom head and attempt to wriggle from side-to-side. The only movement should be round and round!
Replacing the drive socket is part of your regular maintenance – we recommend you check it every 3-6 months for wear by following the instructions here.
Replacement can be undertaken by any competent handy-person (instructions supplied) and takes about 5 minutes.
Tools required: long flat-ended screwdriver, small Phillips screwdriver and a pair of thin-nosed pliers.
*To check your model number, look at the Serial number located on the base of the machine. Series 5 Omniblenders all start with a “5”. If your OmniBlend is a series 4, you will need this part